The Shed - Welding

The Shed, November/December 2019 issue no 87, in shops now

7 October 2019

The November/December 2019 Issue 87 of The Shed, has a real electronics feel about it but there is also a lot here to keep all sheddies informed, entertained and well-skilled up.
Our cover story is about the goal of a Christchurch boat builder, architect, designer, sailor, Quentin Roake, to find a way to build waka in large numbers. He wants to recreate the appearance and characteristics of traditional craft in a modern version that is portable, durable, and economical to manufacture. Quentin has made it his mission to put Maori waka back on the water by marrying traditional knowledge with today’s technology

On a scroll

24 September 2019

Once, while browsing through an old wrought-iron design catalogue, Kim (the son of blacksmiths Ian Nielsen & Son) came across a peacock design and decided it would make a great after-hours project. It turned into a much bigger job than he anticipated with the finished 3 metre by 2 metre gate taking around a ton of steel and about three months to make.

The Shed, September/October 2019 Issue 86, on sale now

12 August 2019

In the October/ November Issue 86 of The Shed, we first head to Whanganui to meet blacksmith Josh Timmins.
Josh has his own way of making knives and axes and shows us how to make a Viking Knife starting with a piece of new steel right through to the finished product.
Then we head to…

Build your own LPG-powered forge video

7 August 2019

This brick forge is constructed from lightweight insulating firebrick. Known as a K26 brick it is available from Certec in Auckland.
These insulating fire bricks are rated to 1426°C and measure 230x115x75mm. They are commonly used to line foundry furnaces, forges, and kilns. These soft bricks can easily be cut to size with an ordinary wood saw, drilled to create burner openings, or routed to create channels.
Watch this video to see how we built this gas forge and an oil-powered version as well.
As featured in The Shed Issue 85

The new issue of The Shed, #85, on sale Australia-wide now

8 July 2019

See this link to find your nearest Australian retailer https://www.theshedmag.co.nz/home/2018/9/5/find-your-local-australian-the-shed-retailer or head to https://magstore.nz/ to buy a copy or to subscribe for six months – two years, print and digital versions available.

On fire!

3 July 2019

Over the last couple of decades I have made my share of braziers, ﬁre pits, and pizza ovens out of anything from old truck rims to LPG cylinders. But my hands-down favourite for source material for ﬁre containers is CNG cylinders.

The Shed July/August 2019, Issue no 85, on sale now

17 June 2019

Always wanted your own knife-makers forge? Well in the July/August Issue 85 of The Shed we show you how to make two differing styles, one using LPG power and one using used engine oil to create the heat. What a great way to dispose of old oil and both give great results without incurring huge build costs.

Then we…

The Shed, May/June 2019 issue no 84, in shops now

15 April 2019

In the May/June 2019 Issue 84 of The Shed we share the amazing skills on one Daniel Strekier who built himself his own extraordinary bicycle… almost entirely out of wood!
It really is something to behold and you just have to sit back and admire the skills that went into making this incredible piece of usable art.
Jude Woodside sits down with Brent Sandow and gets all the background on this, NZ’s most accomplished knifemaker, who shares his inspirations and skills with us.

A racy go kart

24 March 2019

First off, we had to come up with a basic design under the KISS (Keep It Simple, Stupid) rule, keeping in mind the fact that the kids are getting older and harder on the gear. So I decided that easily replaced components were a key at this stage. Number One son is only going to get taller and no doubt half the neighbourhood would want to have a crack at setting the fastest lap around the street, so we had to include an adjustable one-size-ﬁts-all seat in the design.

Shed 83 on sale throughout Australia today

10 March 2019

The Shed Issue 83 on sale today throughout Australia. Find your nearest stockist here.
https://www.theshedmag.co.nz/home/2018/9/5/find-your-local-australian-the-shed-retailer

The Shed 82, Jan/Feb 2019 issue on sale now

2 December 2018

In The Shed 82, the Jan/Feb 2019 issue, its time to join the low & slow cooking revolution – to do that we need to build our own offset smoker barbeque.
In our cover story this issue we showcase three sheddies from around the country as they have their own way of making a smoker just the way they like it. Two out of steel and one out of a wine barrel, yes, a wine barrel. We have all you need to know about low & slow cooking with rubs, woods, cuts – the lot. Get building, get smoking and get stuck in.

Forging ahead

25 October 2018

When I came to select an old gas bottle for this project, the most likely candidate proved to be full of gas. Far too much gas to vent so having committed to making the forge I opted for the second-best option and bought a new bottle. At only $45 it wasn’t a huge outlay although I know that many of you will be shaking your heads at my frivolous wastefulness.
Buying a new bottle has one very handy up side: there is no volatile gas in the bottle. If there was then certain precautions are absolutely essential.

Build a basic trailer- part two

12 October 2018

The frame is braced by angle-iron cross members and has a sturdy, ply wooden deck. It’s best to use not less than 5-ply 12 mm minimum — in this case we have used 7-ply 17 mm. With minor variations, I have built a standard 1200 mm x 1800 mm (6ft by 4ft ) domestic trailer with a solid frame of rectangular hollow section (RHS) mild steel.

The most fun you can have on three wheels!

11 October 2018

Cambridge sheddie Kim Dawick decided to build a drift trike for a mate’s birthday. It was relatively simple and so much fun to ride he decided to build eight more to bring the old gang from school back together. Click through to see the Kim take Mike’s trike for a spin, and another one, and another one….

Build a basic trailer – part one

4 October 2018

A crucial step in building this trailer is to get the axle stub straight, otherwise your tyres will chop up as they run. I use a jig of angle iron to get this straight. But I can show how to do it for home workshop, simply by holding the axle stub ﬁrmly against the bottom and one side of the box section axle to ensure it is square. There must be good welds on the axle stub.

Welding