How often do we need to bend sheet metal, but are put off because of the drama involved? We may turn to a couple of bits of angle iron fitted into the jaws of a bench vice and try to exert even pressure as we fold the metal. I’ve done this and felt less than satisfied with the results.
If there’s one sort of person that cannot resist a challenge that’s a Kiwi backyard inventor. When a mate sent Dave Hunger an internet photo of a giant wheeled contraption and a challenge to reproduce it, Dave rose to the task.
I’ve discovered you don’t have to be New Zealand-born or a male to enjoy this experience, says Natalia.Ever since I have known my husband Nigel, I wanted him to build a small hovercraft for me so that I could drive and handle it myself.
At CC Hydraulics, we do not build log splitters. In fact, we do not design log splitters or profess to be experts as there are excellent commercial log splitters builders and experts around. But we sell plenty of hydraulic equipment to people who design and build their own log splitters and through doing this well, we have gained a lot of knowledge about what works and what doesn’t. Believe me, there is a huge amount of misinformation out there.
Stephen Snedden has been described as the inventor’s inventor and on meeting him it’s not hard to see why. He has an infectious enthusiasm, a can-do attitude and a willingness to share his knowledge.
When I left school I took on an apprenticeship at William Cable in Wellington. Unknown to me at the time, this opportunity would lead to a life-long interest in model engineering. My apprenticeship gave me a wonderful grounding in all aspects of engineering.
THE ARC WELDER is still king of the small workshop. Its versatility and low cost make it the great all-rounder in welding. However, negotiating your way through the forest of available electrodes could be daunting to the newcomer.
In my search on the Internet for alternative cooking appliances, I happened to stumble on this little gem made from two aluminium drink cans. It appears to be doing the rounds and there are many variations out there.
This is not meant to be a rule for making knives as I don’t believe there is one, but merely a guide to give you an insight or get you started on making your own. This is my way, adapted from many hours of reading books, watching movies, making knives and making mistakes and this works for me. So have a go, use this guide and enjoy the work and the result.
Enamelling is an ancient craft which offers contemporary interpretation. Layers of specially formulated, coloured ground glass are fused to metal in a kiln at high temperature. There is a lifetime of possibilities and techniques to explore. I will concentrate on how to make a simple cloisonné pendant in silver and enamel. Almost the same procedure can be followed if copper is used, and personalising the design will make the project special to you.
When Karl Bishop had finished fixing and painting the fence on his newly acquired house he knew he needed to finish it with a gate. A gate would allow the dog to roam safely and it would add an element of security.
TO BUILD A SIMPLE trailer for a small light, runabout of 10ft to 13 ft long by about 5ft wide (3-4 metres long by up to 1.5 metres wide) this design is ideal. It is suitable for a dinghy, tinny, Parkercraft or even your children’s yacht. You can adapt this economical design, but componentry is not cheap, so keep it simple if you want it to remain as affordable as possible.
THIS PROJECT will explore how to produce a cast textured surface and use it to make a pair of monogrammed cufflinks. The textured face of the cufflinks can be produced in two ways. For the first way you will need some sculpture wax, available from Regal Castings tool department.
A bench needs clamps, a second pair of hands to hold the work still and stable. Traditionally, woodworkers have used a holdfast and the most popular of these was the Record holdfast, now sadly out of production.
The process of making what is commonly known as damascus steel has, in some ways, been a little shrouded in mystery. If you try to make damascus remember it is a process. You may not have instant success but look at what you are doing and try to evaluate what you may change in order to “get it right.”
The Shed magazine is eclectic, informed, and always fascinating. Aimed at those with a few tools and perhaps a few clues: this is the magazine for real sheddies.
Packed with ideas, projects, advice, and peeks into other people’s sheds providing inspiration, ideas, and techniques, or just for the sheer enjoyment of the sheddie’s endless inventiveness, The Shed is the project enthusiast’s bible.
Sign up here to The Shed monthly email newsletter for exclusive reader offers.
Sign up here to The Shed monthly email newsletter for exclusive reader offers. For signing up, we’ll send you a free copy of The Shed, just simply put your postal address in the form.