The Shed Logo

Electronics

No one regrets buying quality – The Shed product spotlight

Honda’s inverter generators are famous for their reliability, fuel efficiency and portability but they also supply ‘clean’ power for phones, laptops and power tools. Older generators can produce power spikes or variable voltages that can damage modern appliances. The portable EU10i was the first generator of its size to feature a sine wave inverter assuring commercial-quality electricity.

READ MORE »

The Shed July/August 2019, Issue no 85, on sale now

Always wanted your own knife-makers forge? Well in the July/August Issue 85 of The Shed we show you how to make two differing styles, one using LPG power and one using used engine oil to create the heat. What a great way to dispose of old oil and both give great results without incurring huge build costs.

Then we…

READ MORE »

A bit of light work

The answer came like a light bulb. In fact, it was a light bulb – one that fits snugly under the top of the drill press and shines on the complete work area below, with little or no chance of casting unwanted shadows. It’s easy to make, as you can see from the step-by-step pictures.

READ MORE »

Industrial style at home

For the centre, I had intended to use one-inch (25.4 mm) diameter stainless steel that I had left over from a previous job but the lamp we purchased came with a one-inch chrome-plated tube which I decided to use. It also came with a screwed insert in the top for attaching the lamp and this saved me from needing to make an insert.
If you use stock tube, you will need to make an insert to fit in the top of the tube to take the lamp you purchase. This could be a nut you can find with the same thread as the lamp and where you just need to have the outside diameter reduced or you can make an insert and thread it accordingly.

READ MORE »

The Shed, May/June 2019 issue no 84, in shops now

In the May/June 2019 Issue 84 of The Shed we share the amazing skills on one Daniel Strekier who built himself his own extraordinary bicycle… almost entirely out of wood!
It really is something to behold and you just have to sit back and admire the skills that went into making this incredible piece of usable art.
Jude Woodside sits down with Brent Sandow and gets all the background on this, NZ’s most accomplished knifemaker, who shares his inspirations and skills with us.

READ MORE »

A home-made Kontiki built from scratch

Over the years I’ve tried sails, kites, giant bags, kayaks and surfboards to get hooks out where the fish are. After watching torpedos on the beach, I find it is now obvious that there really is only one way and it requires 12 volts and a motor.
Of course every challenge is only really about what you can learn in the process, so I set about building a kontiki torpedo and winch from scratch for as little as I could. I had to enlarge my capabilities especially in aluminium casting, plastics forming and in electronics.

READ MORE »

The Shed, March/April issue no 83 on sale now

In the March/April 2019 Issue 83 of The Shed we get stuck into that huge home job that, when you do yourself, can save you thousands of dollars – house painting.
We talk to to the paint and filling product manufacturers to get all the latest technical info and arm you with advice on how best to undertake this very important part of home maintenance. With the current paints, technology and fillers you will learn techniques and methods that may amaze you.

READ MORE »

The Shed 82, Jan/Feb 2019 issue on sale now

In The Shed 82, the Jan/Feb 2019 issue, its time to join the low & slow cooking revolution – to do that we need to build our own offset smoker barbeque.
In our cover story this issue we showcase three sheddies from around the country as they have their own way of making a smoker just the way they like it. Two out of steel and one out of a wine barrel, yes, a wine barrel. We have all you need to know about low & slow cooking with rubs, woods, cuts – the lot. Get building, get smoking and get stuck in.

READ MORE »

Electronic, mini wooden Christmas trees

That original version of this project used 3 mm light-emitting diodes (LEDs) and no printed circuit board. Because of its size, it was tricky to wire and not so easy for a novice to construct. But the version of the project being followed here has been updated and adapted for easy construction.

READ MORE »

Electric motorbike build

As a designer and motorcyclist, I had the idea of building an electric motorbike for a long time. The opportunity arose when I was in my final year of an honours degree in industrial design at Victoria University. I rode a 1987 Honda VFR400 to my lectures and the bike started having engine problems. I pulled out all combustion-related components and sold them. By the time I had a plan for an electric motorbike laid out I was part-way through a post-graduate diploma in Computer Aided Design (CAD) at Christchurch Polytechnic.

READ MORE »

The Shed Issue 80, September/October 2018

When we met Des Thomson and his expanding motorhome pod in Issue 76 of The Shed, we were very impressed with his workshop dust extractor. Happily for us all, Des has found the time to share with us how he builds these machines using and an old vacuum and the minimum of parts. Follow his step by step build of a workshop dust extractor in this Issue 80 of The Shed.

READ MORE »

Secrets of amplification

Electronic amplifiers are widely used in almost all electronic equipment— they can either be a separate piece of equipment or an electrical circuit within another device. The ability to amplify is fundamental to modern electronics, where a small electrical signal is amplified into a larger output signal with increased power output or signal strength.

READ MORE »