The Shed - My Shed

Building a potting shed

15 November 2024

Among small buildings you can create without council building consent, a potting shed is very handy. The fact the builder agreed to put up this structure to get the gardening tools out of his shed is another story.
If you can possibly choose a flat site, do so. In this potting shed, the only site available was on a hill which meant a fair bit of work for the builder because of the extra labour and time.
Then in order to avoid the need for a building consent, measure the site up to ensure the 10 m2-or-less potting shed is no closer to the boundary or to a dwelling than its own height. In this case, the boundary is nearby but there are no dwellings close by to worry about. Here the original idea was a three-metre long building but it had to be shortened to 2.1 metres because the boundary was closer than first thought.

Making the cut

12 September 2024

Sentimentality and chainsaws don’t usually go hand in hand but Dave Neame uses the machines not to massacre but to preserve pieces of wood for posterity.
The long-time logger, who is based in North Canterbury, uses his prowess with a chainsaw to mill trees into slabs that can be turned into furniture, kitchen benches, or used as building features.
“I get approached by people who’ve got trees that have sentimental value and they want more than firewood or mulch out of them. I come and mill them up and they can get made into something that becomes a family heirloom.”

Wood fan by name and by nature

6 September 2024

Brian Woodlands is semi-retired now but in his shed in south Australia he can proudly show off the samples from his joinery trade, the machines that supported his livelihood, the dozens of wood samples he collects, his antique hand tools and the rustic shed where “I have done some big stuff in this small workshop over the years.”
While the wind can come visiting through the spaces in the walls and open door, there is a cosy fire in an inner-room of the old-style country building and yarns aplenty to warm up the shed with an animated atmosphere.
“I was born here in the Adelaide Hills. My grandparents lived here in this district pre-war [World War Two] and my mother and father lived in the wattle-and-daub cottage over the road,” Brian says.
“In 1968, I took up an apprenticeship as a carpenter and joiner when I was 14 years old. I was not that rapt in school. As an apprentice you had to sacrifice wages to train but by time you were 18 or 19 it was good money. Today, apprentices start too late because they turn to the money first and it’s better early to be working at McDonald’s.”

Along for the ride

16 August 2024

Every Wednesday and Saturday morning about 20 retired tradesmen leave their lunch boxes in the Oamaru Steam and Rail smoko room, shrug themselves into their overalls, and head for the old railway workshop to get on with the day’s tasks.
They might be restoring turn-of-the-20th century railway carriages, stripping down a locomotive or installing wiring systems. Each man brings a lifetime’s worth of skills and the willingness to learn something new.
They work out of the old New Zealand Rail wagon workshop, or lifting shop as it was called, at the back of Oamaru’s historic precinct. The Oamaru Steam and Rail Society Inc took over the building in 1989. Most of the tools and equipment needed to complete the volunteers’ first major project were on hand so they rebuilt the 60mx12m workshop which had been partially demolished by NZ Rail when they decamped.

Preserving the past

25 July 2024

It started with a teddy bear, then an American Greyhound bus, a wind-up Sherman tank and an aeroplane. Alastair Allan held on to his toys long after others would have put them aside. He’s still got them, along with several thousand other items that he has bought or acquired over the past 70 years or so. He declares he is holding on to the past for the future to tell the story of how people lived in North Otago as far back as 150 years ago.

Frozen in time

7 June 2024

I just love nosing around other people’s workshops to see what they are making and what gear they have, and I’ve just had the special opportunity to look at a manufacturing workshop that was about to be sold up and, as a bonus, learn about its history.
Macdonald Refrigeration surely has a place in Auckland’s heritage as a pioneer in its field. The factory has been closed for some time now and it has been hard for the family to let go of all the gear, but it is filling a lot of valuable space.

A dream shed that came true

9 May 2024

Gary Wells has a shed that isn’t quite your normal sheddie bloke’s shed. It is still a place of work but a recent extension, after a quick clean-out, now doubles as a well-appointed entertainment area complete with bar and luxurious sofas which Gary made from the backs of two Ford cars. It could also be the old 1950s petrol station at Makarewa, once a small township and now incorporated into Invercargill to the north. A quick glance around Gary’s shed at the old-style petrol bowsers, the weather-beaten, corrugated iron wall, advertising placards and oil dispenser puts you back in the days when petrol was actually served to customers.

Mr Fix it

21 March 2024

Ian Chamberlain’s shed is upstairs in the second storey of his double garage in Whanganui. Ian certainly needs all the room on the ground floor to park just a few of the vintage and classic cars he has restored over the past 30-odd years. And while the styles of car evoke a walk down memory lane, the vehicles look brand-spanking new.
There’s a fire-engine red Mark 1 Zephyr convertible, a more staid looking green and black 1917 Buick, the red and brassy 1906 Reo, and its miniature look-alike.

His worship – the shed and vintage cars

25 October 2023

The morning we visited this particular sheddie, the bloke was under fire. In The Press, he was being slagged off on the front page. Inside the paper, a swag of writers was pinging him this way and that in letters to the editor. Christchurch is a hotbed of political discontent these days and the buckshot stops with the mayor Garry Moore.
So he’d be in no mood to spend a lovely spring Saturday morning talking to a complete stranger about something as mundane as his not-quite-finished shed? Wrong.

Size matters

21 September 2023

Back in the carefree/careless days we took a drive up to the Hokianga harbour, mainly for a fish and chip meal at the legendary Omapere pub, and promptly fell in love with the place. It’s New Zealand 50 years ago: clean, uncluttered with houses and people and just plain beautiful on any given day.
The harbour simply sparkles on a sunny day and the dunes on the north head are nothing short of spectacular. The views coming over the ridge from Waimamaku and the Waipoua forest are breath-taking. We still stop and try to take it all in.
Everything moves at a leisurely pace up at the “Hoki”. It is still a hidden gem, but not for long I feel. We have a few celebs up there now and there are more and more serious homes going up, but it still has that laid back feel to it. Opo the dolphin is the only thing that has happened to the area and that was 60 years ago.

A king-sized country shed for an ex city boy

11 July 2023

When Phil Kindberg decided to escape the Auckland rat race and retire to rural Taranaki with his precious collection of old Studebaker cars, he didn’t dream of the massive shed that was waiting for him.
Two years ago he made the shift south and purchased the 100-year-old Riverdale dairy factory, not far west of Hawera.
The big factory, which in its heyday specialised in cheese production, already had a bit of a past with motor vehicles, having been a panel beating shop for a while and also once housing a huge collection of old Citroen cars.
Now on display in the factory are Phil’s seven Studebakers from 1947 to 1962, a 1958 Packard, a mate’s collection of 40 motorbikes, including some classics and home-made bikes, and other weird and wonderful machines.

Unpublished photos from our visit to the home shed of Stan the Builder

23 June 2022

With the Pacific Ocean rolling to shore just across the road from his shed at Wainui Beach, avid surfer and passionate sheddie, Stan Scott, is never too far from his two favourite places.
As far as careers in the building trades go Stan’s has been one out of the box, driven largely by his insatiable curiosity and his never-say-never attitude. Building he says, has taken him places he never dreamed of going. Stan is a familiar face to many Kiwi’s. He has built and presented on a raft of TV renovation shows; is the current brand ambassador for Mitre10 and has even managed a few how-to spreads for us at The Shed.
When he’s not busy planning, building, filming and fronting Mitre10’s web based DIY series’ or giving instore presentations across the country, Stan is home juggling his own building jobs with personal projects and family life.

The 100th issue of The Shed is coming soon

15 November 2021

The next issue of The Shed is a milestone magazine, our 100th and we are building a bumper issue, our biggest magazine for many a year.
There will be plenty of special anniversary content along with our usual projects and advice.
One of the articles we are particularly looking forward to publishing is a visit to the home shed of Mitre 10 DIY guru, Stan Scott. Stan shows us around his home shed and shares with us what he creates in his leisure time.

Ian Knight’s western action shooting club as featured in Issue 99

24 September 2021

Video of the knifemaking workshop of Brent Sandow

24 February 2021

In The Shed magazine Issue 92, we featured master knifemaker Brent Sandow and learned a lot about his knifemaking skills. While we were there, Brent also gave us a guided tour of his well-equipped knifemaking workshop. Be prepared for workshop envy.

My Shed