The Shed July/August 2019, Issue no 85, on sale now

The Shed July/August 2019, Issue no 85, on sale now

Always wanted your own knife-makers forge? Well in the July/August Issue 85 of The Shed we show you how to make two differing styles, one using LPG power and one using used engine oil to create the heat. What a great way to dispose of old oil and both give great results without incurring huge build costs.

Then we get travelling, first stop Whanganui, where sheddie Alby Redmond taught himself wood turning six years ago and went on to master the meticulous craft of segmented turning. Then we head to the USA to meet the Miller family who use technology to regain exercise and fun when Sean and the children build a all-electric three-wheeled trike for mum.


Read More

Making a violin - Part One

Making a violin - Part One

When I decided to make a violin to take to a conference in America, I chose a beautiful example by Guarneri “del Gesu”—the “King” violin made in 1735—as a model.
Given the significance of the violins by the great makers, there is a respected tradition of making copies or instruments modelled on their work. I was quite happy for The Shed magazine to follow its progress but as there are books written in great detail about violin-making, this magazine article can only be a summary of what I did and some of the problems I encountered.

Read More

A bit of light work

A bit of light work

The answer came like a light bulb. In fact, it was a light bulb – one that fits snugly under the top of the drill press and shines on the complete work area below, with little or no chance of casting unwanted shadows. It’s easy to make, as you can see from the step-by-step pictures.

Read More

Industrial style at home

Industrial style at home

For the centre, I had intended to use one-inch (25.4 mm) diameter stainless steel that I had left over from a previous job but the lamp we purchased came with a one-inch chrome-plated tube which I decided to use. It also came with a screwed insert in the top for attaching the lamp and this saved me from needing to make an insert.
If you use stock tube, you will need to make an insert to fit in the top of the tube to take the lamp you purchase. This could be a nut you can find with the same thread as the lamp and where you just need to have the outside diameter reduced or you can make an insert and thread it accordingly.

Read More

Double the good news for our Australian readers

Double the good news for our Australian readers

The latest issue of The Shed, Issue 84, is on-sale all around Australia this week. Click on this link for the latest retail outlets near you to pick up a copy
https://www.theshedmag.co.nz/home/2018/9/5/find-your-local-australian-the-shed-retailer
But wait, there’s more. For the final time, we also have a limited number of copies of our special edition publication Best of The Shed also on-sale in all Australian states. This is the last of our stock of our Best-of 10 years of The Shed.

Read More

Calling all skilled model makers and miniaturists

Calling all skilled model makers and miniaturists

The New Zealand Maritime Museum in Auckland is currently seeking skilled model makers and miniaturists to volunteer in their fully equipped Model Maker’s Workshop.
The museum has embarked on an ambitious project to build a replica model of Captain Cook’s HMS ENDEAVOUR, to commemorate the 250th anniversary since the first onshore meetings between Māori and Europeans.
The museum estimates it will take a team at least 2000 hours to complete the build of the model.

Read More

An engine imagined

An engine imagined

“The sound of that Pearse wing destroying itself in a matter of seconds as it tore itself apart in a chain reaction fashion on the 14th September in 2012 at Whenuapai Air Base is a sound that I don’t think any of us will forget for a long while.” Retired Air New Zealand captain, Neville Hay as test pilot was not apprehensive but noted, "You have to think about everything you do. You can't rely on memory of flying the plane.”

Read More

Black oxide finish

Black oxide finish

The particular process we are looking at in this article does not effectively alter the dimensions of the part as it etches into the surface rather than deposits on top. Black oxide finish is sometimes called parkerizing and it is common on components such as gun barrels because it does not involve high enough temperatures to cause distortion and there is no dimensional change.

Read More

A backyard Tandoor oven

A backyard Tandoor oven

Since building the pizza oven as detailed in an earlier issue of The Shed , I have become more and more interested in different ways of cooking food. My pizza oven now produces a variety of breads and succulent roasts. As the oven sears the food with heat to seal in the flavours, it produces the succulence. Conventional cooking dries out food be-cause it is a relatively slow process. Those of you who built the pizza oven will know that the cooking process can be measured in seconds rather than hours.

Read More

The Shed, May/June 2019 issue no 84, in shops now

The Shed, May/June 2019 issue no 84, in shops now

In the May/June 2019 Issue 84 of The Shed we share the amazing skills on one Daniel Strekier who built himself his own extraordinary bicycle… almost entirely out of wood!
It really is something to behold and you just have to sit back and admire the skills that went into making this incredible piece of usable art.
Jude Woodside sits down with Brent Sandow and gets all the background on this, NZ’s most accomplished knifemaker, who shares his inspirations and skills with us.


Read More

Totally transparent

Totally transparent

Chance is a fine thing. When Myke Bakker’s mother decided to do a leadlight course when he was a high school student and brought the tools home, she unwittingly set on course a chain of events that would influence the direction of her son’s life.
“I was fascinated by the whole process and started mucking around,” says Myke. “I made my first leadlight when I was 17.”
Fourteen years later, Myke is still intrigued by the many possibilities of working with glass and he’s made a career out of it in the process. He is one of a small team who work at Sauvarins Coloured Glass Studio in Auckland’s Penrose specialising in all things glass.

Read More

New Kiwi TV show - Start me up

New Kiwi TV show - Start me up

Start me up is the world's first car show based on the phenomenon of “cold starting” - an online craze where cars that haven’t run for years or more - typically decades have their engines fired up or “cold stated”.
Screening now on TVNZ On Demand and soon on the Duke channel. Click ‘Read more” to get the full rundown on the show.


Read More