The Shed January/February 2021 Issue 94, on sale now

The Shed January/February 2021 Issue 94, on sale now

There’s a real Triumph in the issue of The Shed and a twin-engined one at that as well as the bonus of our annual The Shed 2021 wall calendar.
Our cover story this issue is about a central South Island marine engineer sheddie who really is living the dream. A love of classic cars and motorbikes has seen this marine engineer buy a working garage to store and restore his own collection as well as operate it as an everyday mechanical repair garage for local customers.

Read More

A night at the speedway

A night at the speedway

The allusion to knights and jousting is apt. Like knights in armour, the drivers especially of the sprint cars have very restricted vision. They can peer through the grille in front and can see a bit to the left but their right-hand vision is blocked by a wing and within the confines of the cockpit—with helmet and neck brace in place—they have very little opportunity to turn their heads. To make things worse, other cars are flinging up dust and mud that also helps to clog their vision.

Read More

The Shed Issue 93 now on sale in Australia

The Shed Issue 93 now on sale in Australia

Well, it took a bit longer to arrive than usual but at last, the November/December 2020 Issue 93 of The Shed is on sale across Australia from today, Thursday 19 November.
The COVID 19 pandemic has played havoc with international freight shipping so its later than usual arriving in Sydney for distribution around the country. Australian subscribers will start receiving their copies from this week as well.

Read More

Polish query ‘Autosolved’

Polish query ‘Autosolved’

If you haven’t heard of Autosol, you can thank us later.
This revolutionary, ammonia-free product is the go-to cleaner and polish for uncoated aluminium surfaces. It leaves a clean sheen without scratching or hazing. The distributors say users describe it as “a product that does everything the advertising says it does”, “my go-to polish for aluminium”, and “perfect for alloy wheel rejuvenation”. It is available in a 75ml tube with screw caps from automotive, engineering, and hardware stores across New Zealand.

Read More

Show your shed to the world

Show your shed to the world

Our 2021 The Shed Calendar will be accompanying the January February 2021 Issue 94 of the magazine, on sale November 30.
We are calling for readers to send us a photo of their shed to feature in the calendar and get bragging rights over your mates for all of next year!
Head to our Facebook page for more details and to enter. Competition closes October 4. Good luck.

Read More

Shed 92 on sale across Australia today

Shed 92 on sale across Australia today

For all our Australian readers the wait is over to grab the latest issue of the magazine. The September/October, Issue 92, hits the shops all across the country from today 17 September.

Read More

Spotless shine

Spotless shine

Polishing metal isn’t a task for which you want to be ill-equipped, especially when you’re chasing that perfect shiny finish! That is why Autosol has been the most trusted name since forever. The new Autosol 3in1 for Stainless Steel is specially developed to clean, protect, and leave a shiny streak-free finish on stainless steel surfaces — with anti-fingerprint effect.


Read More

Make a camper trailer

Make a camper trailer

American teardrops first became common in the 1930s after DIY magazines such as Popular Mechanics published plans to build your own. The ultra-lightweight concept normally only sleeps a maximum of two adults in the cabin and has a small outside galley or kitchen at the back of the trailer. Often these campers weighed little more than 450kg and were very streamlined so were ideal for towing behind small cars or for long road trips.

Read More

Building a 50cc mini-kart

Building a 50cc mini-kart

The design is not intended to be a high-performance, go-anywhere vehicle. It is a school project and therefore there are a few compromises in the design. It is economical to construct, achievable and straightforward for average Year 12 students. I might add, with some guidance.
It is also intended that most, if not all, of the Tools4work Level 2 mechanical engineering standards can be assessed against this project. Some of the techniques described may seem unnecessary, such as using a surface plate and scribing block for marking out, the design of the bearing retainers, or the generous use of a Bramley tube bender.

Read More

The Shed May/June Issue 90 on sale today throughout Australia

The Shed May/June Issue 90 on sale today throughout Australia

The Shed Issue 90 is finally in shops across Australia from today.
The COVID 19 virus disrupted all shipping so this issue of The Shed is over six weeks late to arrive in stores. Our apologies for that delay but we hope you find the wait was actually worth it. Check out the fully illustrated content rundown for this magazine.

Read More

The Shed July/August 2020 Issue 91, on sale now

The Shed July/August 2020 Issue 91, on sale now

The July/August 2020 issue of The Shed, No. 91, has got something in it for every sheddie.
Even though there is something of a nautical theme to this issue, our cover story is on building a very powerful, vertical, hydraulic log splitter. Bill Stevenson from Christchurch walks us through the construction of his trailer-mounted log-splitting machine that was started prior to the Covid-19 lockdown, worked on during, and completed immediately after. A great effort.

Read More

Work, life and play

Work, life and play

Most people have separate places for work, play, accommodation and their hobbies but Malcolm Anderson has successfully managed to combine them all into one.
Malcolm’s father, Bruce Anderson, has a passion for collecting and restoring motorbikes to the highest standard. One of his projects, a 1929 Harley-Davidson OHV Two-port Special that he restored from a pile of parts, now resides in the Harley-Davidson Museum in Milwaukee in America.

Read More

Video of Cowper Trucks from The Shed Issue 90

Video of Cowper Trucks from The Shed Issue 90

In this issue of the magazine we featured the trucks and workshop of Dan Cowper of Cowper Trucks in his shed just outside Whanganui.
Check out this video where Dan gives us the background to his business and how he builds his go anywhere, do anything, V8-powered, 4x4 vehicles.

Read More

Video of vintage fire engines at the Westland Heritage Park, Hokitika

Video of vintage fire engines at the Westland Heritage Park, Hokitika

In The Shed Issue #80 we visited this heritage park and met the great folks caring for and restoring industrial machines and vehicles.
Here is a short video of their collection of volunteer fire brigade engines from around the South Island. Our tour guide is Michael Rooney.

Read More

The Shed March/April 2020, Issue 89, in shops now

The Shed March/April 2020, Issue 89, in shops now

Issue 89 of The Shed has a great mix of projects and sheddie talents to enjoy.
Nigel Young records the build of a mega-sized spit roast BBQ. Built by the team at the Halswell Menzshed as a fundraising project, this big trailer-mounted gas-burning beast of a cooker can take a full-sized pig for those big gatherings or fund-raising projects.

Read More