The Shed Logo
Search
Close this search box.

Restoring a 1971 Johnson outboard motor

A couple of Shed readers start a rebuild project for the Shed Magazine

We got this email from a Shed reader who was sent a project from another Shed reader, the rebuild of a 1971 Johnson 25hp outboard motor.


The challenge, to rebuild this outboard from a box of bits

The idea being that this pile of bits would eventually become a backup motor for his fishing boat. So nice to see our readers are thinking of us. Here at The Shed we are already looking forward to the restored engine article.
Below is the note that came with the engine, the Sheddies names have been deleted. 
“As mentioned earlier, herewith the old Johnson outboard from dad’s shed. Make of it what you will or if you are not inclined or reckon it is not worth the effort or in the too hard basket or whatever, pass it onto someone who may be keen to give it a go, or, simply send it to the tip.
In any event, I reckon it could be a good article for The Shed magazine so if you or someone else wants to give it a go and give it a Lazarus type resurrection or rebirth, maybe take some photos for a Shed article as you go along.
Kind regards and cheers to all.”
Onya fellas.


Lets hope all the parts are here


Even the newspaper wrapping the parts is from the 1970s

 


The jigsaw building begins

The jigsaw building begins

Share:

More Posts

Engines on the move

Something that many shed owners must face at some time is how to maintain their hobby if they have to downsize their property. Owen White is one person who has successfully achieved this by not only downsizing the house but downsizing the hobby. Instead of restoring old internal combustion engines he now makes scale models of them.
In the 1960s, Owen got hold of a 1930s 9 hp Briggs and Stratton stationary engine to restore and was bitten by the vintage engine bug. It sparked a 50-year passion for old combustion engines, and for repairing, restoring and running them at vintage engine shows. Owen joined the Vintage Engine Restorers Club in 1985 after attending their third meeting and remains an active member.

The Shed magazine April/May 2024 issue 114 on sale now

When Athanasius (Athow) Santamaria made an “impulse decision”, to buy a pile of old Austin parts in 2015, he didn’t really have a project in mind.
But this young kiwi sheddie, with no car building experience at all, figured he would have a crack at building a car from this pile of parts. Now, he is well down the track to completing an authentic reproduction Austin Seven Ulster; a scratch-built, boat-tail, two-seater sports car.
Athow south guidance and advice from Austin and vehicle restorers far and wide and the result is really quite remarkable. There is still some way to go but the skills he has acquired on his journey is apparent for all to see.
“The Ulster body is shaped from 5005 aluminium, which is a little harder than industry standard 3003.

Mr Fix it

Ian Chamberlain’s shed is upstairs in the second storey of his double garage in Whanganui. Ian certainly needs all the room on the ground floor to park just a few of the vintage and classic cars he has restored over the past 30-odd years. And while the styles of car evoke a walk down memory lane, the vehicles look brand-spanking new.
There’s a fire-engine red Mark 1 Zephyr convertible, a more staid looking green and black 1917 Buick, the red and brassy 1906 Reo, and its miniature look-alike.